Safety and Light

Safety and Light
Ai1 Series

A unique device
for your electric panel safety.

Everything you need to inspect electrical panels in the safest way.

And it's all integrated in a single device, compact and accessible.

DOMO Ai1 can help prevent accidents by warning the operator and signaling that the electric system is active with flashing lights and a repeating sound.

As the door opens, the integrated limit switch also enables or disables other devices and activates a light that illuminates the inside of the electrical panel.

Go to products

Blinking LED lights

The three LED lights flash to indicate the presence of tension inside the electrical panel. Different flashing sequences indicate the condition of the electrical panel.

SEQUENTIAL BLINKING
- presence of 380V tension inside the electrical panel
- circuits correctly phased
RANDOM BLINKING
- presence of 380V tension inside the electrical panel
- circuits not correctly phased
SIMULTANEOUS BLINKING
- presence of 220V tension inside the electrical panel

Buzzer sound

A repeated sound warns you of the presence of tension when the door is open.

Sound can be temporarily turned off using the switch located under the device.

Limit switch

The integrated limit switch activates all the functions of the device at the cabinet door opening.

You can choose between two different switch sizes.

CLOSED DOOR SIMULATION

By pulling the switch, you simulate the closed door: all the auxiliary contacts are restored to the condition of closed door.

High intensity light

A 900lm light powered by a 48 LED cluster illuminates the inside
of the electrical panel facilitating the operator's intervention.

Auxiliary contacts

Have the most under control: enable or disable any device inside the electrical panel (lights, fans, guards...) when the door is open.

Easy to mount

We have worked hard so you don't have to.

The Ai1 device has been carefully designed to be easily mounted:

once it is installed on the electrical panel (two screws is all it takes)
you don't need any other tool to have it fully operating.
Connect the cables and you are good to go.

3 models to meet your needs.

Ai1 VP STANDARD
- Limit Switch
  - -
  - Standard lenght (22mm)
  - Extra long (46mm)
- Power supply voltage
  - 3 Phase Voltage 220÷500V AC 50-60Hz
  - 1 Phase Voltage 110÷230V AC 50-60Hz
- Extra features
  - Buzzer sound 80dB
- Specific features
  - 3-Phase Voltage Presence Indicator
    
    One blinking LED for each phase.
    When a LED is OFF, the corresponding phase is interrupted.
    
    SEQUENTIAL BLINKING
    
    3 Phase circuit 220÷500V AC 50-60Hz correctly phased
    
    RANDOM BLINKING
    
    3 Phase circuit 220÷500V AC 50-60Hz NOT correctly phased
  - 1-Phase Voltage Presence Indicator
    
    SIMULTANEOUS BLINKING
    
    1 Phase circuit 110÷300V AC 50-60Hz
  - -
  - Auxiliary contact SPDT
    
    (Single Pole Double Throw NO/NC)
    Usually used to switch on/off external lighting, heaters, fans, conditioners, releays, etc...
Go to technical features
Ai1 LED FULL
- Limit Switch
  - -
  - Standard lenght (22mm)
  - Extra long (46mm)
- Power supply voltage
  - 3 Phase Voltage 220÷500V AC 50-60Hz
  - 1 Phase Voltage 110÷230V AC 50-60Hz
- Extra features
  - Buzzer sound 80dB
- Specific features
  - 3-Phase Voltage Presence Indicator
    
    One blinking LED for each phase.
    When a LED is OFF, the corresponding phase is interrupted.
    
    SEQUENTIAL BLINKING
    
    3 Phase circuit 220÷500V AC 50-60Hz correctly phased
    
    RANDOM BLINKING
    
    3 Phase circuit 220÷500V AC 50-60Hz NOT correctly phased
  - 1-Phase Voltage Presence Indicator
    
    SIMULTANEOUS BLINKING
    
    1 Phase circuit 110÷300V AC 50-60Hz
  - High Intensity Light
    
    LED cluster light that illuminates the inside of the electrical panel.
    
    LIGHT INTENSITY
    
    10W 900lm
    
    ELECTRICAL ABSORPTION
    
    2W
    
    NUMBER OF LEDS
    
    48
    
    LIGHT CONSUMPTION
    
    80mA
    
    LIGHT COLOR
    
    Cold white - approx 5500K
  - Auxiliary contact SPDT
    
    (Single Pole Double Throw NO/NC)
    Usually used to switch on/off external lighting, heaters, fans, conditioners, releays, etc...
Go to technical features
Ai1 LED LIGHT
- Limit Switch
  - Without limit switch
  - Standard lenght (22mm)
  - Extra long (46mm)
- Power supply voltage
  - 3 Phase Voltage 220÷500V AC 50-60Hz
  - 1 Phase Voltage 24÷230V AC 50-60Hz
- Extra features
  - -
- Specific features
  - -
  - -
  - High Intensity Light
    
    LED cluster light that illuminates the inside of the electrical panel.
    
    LIGHT INTENSITY
    
    10W 900lm
    
    ELECTRICAL ABSORPTION
    
    2W
    
    NUMBER OF LEDS
    
    48
    
    LIGHT CONSUMPTION
    
    80mA
    
    LIGHT COLOR
    
    Cold white - approx 5500K
  - -
Go to technical features

Sign In

Safety and Light

Safety and Light Ai1 Series

Everything you need to inspect electrical panels in the safest way.

Blinking LED lights

SEQUENTIAL BLINKING

RANDOM BLINKING

SIMULTANEOUS BLINKING

Buzzer sound

Limit switch

CLOSED DOOR SIMULATION

High intensity light

Auxiliary contacts

Easy to mount

Ai1 VP STANDARD

Limit Switch

Power supply voltage

Extra features

Specific features

3-Phase Voltage Presence Indicator

SEQUENTIAL BLINKING

RANDOM BLINKING

1-Phase Voltage Presence Indicator

SIMULTANEOUS BLINKING

Auxiliary contact SPDT

Ai1 LED FULL

Limit Switch

Power supply voltage

Extra features

Specific features

3-Phase Voltage Presence Indicator

SEQUENTIAL BLINKING

RANDOM BLINKING

1-Phase Voltage Presence Indicator

SIMULTANEOUS BLINKING

High Intensity Light

LIGHT INTENSITY

ELECTRICAL ABSORPTION

NUMBER OF LEDS

LIGHT CONSUMPTION

LIGHT COLOR

Auxiliary contact SPDT

Ai1 LED LIGHT

Limit Switch

Power supply voltage

Extra features

Specific features

High Intensity Light

LIGHT INTENSITY

ELECTRICAL ABSORPTION

NUMBER OF LEDS

LIGHT CONSUMPTION

LIGHT COLOR

Company

Helpdesk

Products

Support

Safety and Light
Ai1 Series